Intel NUC 7 - Open the Intel NUC Chassis; Installing and Removing Memory

User Guide for NUC7CJYH, NUC7PJYH
3
This guide tells you how to:
• Install and remove memory
• Install a 2.5” drive
• Install a VESA mount bracket
• Connect power
• Install an operating system
• Install the latest device drivers and software
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1. With a screwdriver unscrew the four corner screws on the bottom cover of the chassis and lift the
cover.
Installing and Removing Memory
Intel NUC Kits NUC7CJYH and NUC7PJYH have two 260-pin DDR4 SO-DIMM sockets. Be sure to select
memory modules that meet these requirements:
• 1.2V low voltage memory
• 2400 MHz SO-DIMMs
• Non-ECC
Find compatible memory modules in the Intel® Product Compatibility Tool:
• NUC7CJYH
• NUC7PJYH