Intel NUC6CAYH User Manual

Intel NUC Kit NUC6CAYH User Guide
3
This guide tells you how to:
• Install a different wireless card (optional)
• Install and remove memory
• Install a 2.5” drive
• Install a VESA mount bracket (optional)
• Connect power
• Install an operating system
• Install the latest device drivers and software
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover.
Install a Different Wireless Card (Optional)
The Intel NUC Kit NUC6CAYH includes a pre-installed Intel® Dual Band Wireless-AC 3168 wireless card. If
you choose to install a different card, it needs to be an M.2 2230 form factor.
Only the following wireless adapters have been evaluated for regulatory compliance for use with the Intel
NUC Kit NUC6CAYH in all regions:
 Intel® Dual Band Wireless-AC 3165
 Intel® Dual Band Wireless-AC 7265
The operation of any other wireless adapter with Intel® NUC Kit NUC6CAYH, other than those listed above,
may violate regulatory compliance requirements for your region.
For more information on wireless adapters, go to: http://www.intel.com/support/wireless/wlan.

Intel NUC6CAYH Specifications

General

Processor	Intel Celeron J3455
Processor Cores	4
Processor Base Frequency	1.5 GHz
Processor Max Turbo Frequency	2.3 GHz
Graphics	Intel HD Graphics 500
Graphics Base Frequency	250 MHz
Graphics Max Dynamic Frequency	750 MHz
Memory Slots	2
Max Memory Size	8 GB
Networking	Gigabit Ethernet
Bluetooth	Bluetooth 4.2
HDMI Ports	1
Card Reader	SDXC with UHS-I support
Operating System Support	Windows 10, Linux
Memory Type	DDR3L-1600
Storage	2.5" SATA HDD/SSD
Wireless	802.11ac
USB Ports	4 x USB 3.0, 2 x USB 2.0
Video Output	HDMI, VGA
Audio	3.5mm
Dimensions	115 x 111 x 51 mm
Power Supply	65W