l Target IP - Enter the target IP address of the iSCSI target in this field. This option is visible if DHCP
for iSCSI target is not enabled.
l Target Port - TCP Port Number.
l Boot LUN - Enter the LUN ID of the boot disk on the iSCSI target in this field. This option is visible if
DHCP for iSCSI target is not enabled.
iSCSI CHAP Configuration
Intel® iSCSI Boot supports Mutual CHAP MD5 authentication with an iSCSI target. Intel® iSCSI Boot uses
the "MD5 Message Digest Algorithm" developed by RSA Data Security, Inc.
The iSCSI CHAP Configuration menu has the following options to enable CHAP authentication:
l Use CHAP - Selecting this checkbox will enable CHAP authentication for this port. CHAP allows the
target to authenticate the initiator. After enabling CHAP authentication, a user name and target pass-
word must be entered.
l User Name - Enter the CHAP user name in this field. This must be the same as the CHAP user name
configured on the iSCSI target.
l Target Secret - Enter the CHAP password in this field. This must be the same as the CHAP password
configured on the iSCSI target and must be between 12 and 16 characters in length. This password
can not be the same as the Initiator Secret.
l Use Mutual CHAP – Selecting this checkbox will enable Mutual CHAP authentication for this port.
Mutual CHAP allows the initiator to authenticate the target. After enabling Mutual CHAP authen-
tication, an initiator password must be entered. Mutual CHAP can only be selected if Use CHAP is
selected.
l Initiator Secret - Enter the Mutual CHAP password in this field. This password must also be con-
figured on the iSCSI target and must be between 12 and 16 characters in length. This password can
not be the same as the Target Secret.
To Next Page
Loading...
Need help?
General
