Need help?Do you have a question about the Intel RS2WG160 and is the answer not in the manual?
General| Product Type | RAID Controller |
|---|---|
| Product Name | Intel RAID Controller RS2WG160 |
| RAID Levels Supported | 0, 1, 5, 6, 10, 50, 60 |
| Maximum Drives Supported | 16 |
| Max Devices Supported | 16 |
| Cache Memory | 512 MB |
| Form Factor | Low-profile |
| Operating Systems Supported | Windows, Linux |
| Controller Type | RAID |
| Interface Type | SAS |
| Interface | SAS |
| Data Transfer Rate | 6 Gb/s |
Discusses fault tolerance and error recovery mechanisms.
Explains rules for expanding capacity and migrating RAID levels.
Provides step-by-step instructions for physical installation.
Guides on how to configure the controller via BIOS.
Steps to fix configuration inconsistencies.
Details the primary RAID-on-Chip processor.
Explains the audible alarm signals for drive failures.
Provides pin definitions for SAS/SATA connectors.
Lists the technical specifications of the RAID controller.
Details the performance characteristics of RAID arrays.
Explains the fault tolerance features and mechanisms.
Describes the status codes for physical drives.
Describes the status codes for virtual drives.
Explains how to move drives to different ports.
Precautions to prevent ESD damage.
To Next Page
