Intel S7000FC4UR - Introduction; Power Cord Specifications; 1570 Watt Power Supply Specifications

Revision 1.0
1
1. Introduction
This document helps customers procure power cords for the Intel
®
Server System
S7000FC4UR.
This information is available for each power cord by geographical region:
 Component description and function
 Part numbers and revision levels
 Vendor contact information
2. Power Cord Specifications
The Intel
®
Server System S7000FC4UR does not include power cordsets for the two 1570-watt
power supplies because of the unique requirements and differing AC services in regions where
the system may be shipped.
The maximum input/output power expectations of the server system are:
 System power input: 80% efficiency at 90-240 VAC
 System power output: 1570 Watt
2.1 1570 Watt Power Supply Specifications
The AC input specifications of the 1570-watt power supply are:
Parameter Minimum Nominal Maximum Unit
Input Voltage (Low Line) 90 100-127 140 VAC
rms
Input Voltage (High Line) 180 200-240 264 VAC
rms
Input Current (90VAC) 14.4 A
rms
Input Current (103.5VAC) 14.4 A
rms
Input Current (180VAC) 11.1 A
rms
The AC inlet connector is an IEC320 C14 receptacle (rated for 15A, 250VAC).