Intel SASWT4I User Manual

Intel® RAID Controller SASWT4I Hardware User’s Guide 5
2 Intel
®
RAID Controller SASWT4I
Hardware Installation
This chapter describes the procedures used to install the Intel
®
RAID Controller
SASWT4I with internal connectors.
Requirements
The following items are required to install a Intel
®
RAID Controller SASWT4I:
• An Intel
®
RAID Controller SASWT4I.
• A host system with an available x4 bi-directional PCI Express* slot.
• The Resource CD, which contains drivers and documentation.
• Cables that are compatible with the RAID controller.
• SAS or SATA II hard disk drives.
Note: Intel Corporation strongly recommends using an uninterruptible power supply (UPS).

Intel SASWT4I Specifications

General

Brand	Intel
Model	SASWT4I
Category	Computer Hardware
Language	English