10 Intel® RAID Controller SASWT4I Hardware User’s Guide
Replacing a Controller
To replace a failed controller, follow these steps:
1. Power off the computer, all drives, enclosures, and system components. Remove
the power cord.
2. Remove the chassis cover and access the PCI Express* add-in card slots. For
instructions, see your server documentation.
3. Disconnect the cable(s) from the RAID controller.
4. Remove the failed controller from the system.
5. Insert the replacement controller into the system. For instructions, see “Installing
the RAID Controller”.
To Next Page
Loading...
Need help?
General
