EasyManua.ls Logo

Intelix INT-44HDX-BSTK - Product Overview; Package Contents

Intelix INT-44HDX-BSTK
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INT-44HDX Installaon Guide
6
The Intelix INT-44HDX is a four input by four output HDBaseT/HDMI matrix switcher with HDCP 2.2 and UHD/30
video support. The matrix features advanced EDID and HDCP handling, including the ability to turn input HDCP
compliance ON and OFF to ensure maximum funconality with a wide range of sources.
The INT-44HDX features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the rst
two outputs, allowing the same signal to be routed to the HDMI connector and a remote desnaon with an
HDBaseT receiver. The HDBaseT ports support up to UHD/30 HDMI video with audio, bidireconal wide-band IR,
matrix control via IR, RS232 tunneling, and HDCP (1.4 and 2.2) up to 100 meters (328 feet). Each HDBaseT output
port supplies power to the aached extender, eliminang the need for a power supply at the display end. Each
output features analog stereo audio de-embedding and coaxial mulchannel audio de-embedding for connecon
to ampliers or DSPs.
The INT-44HDX can be controlled via front panel buons, front panel IR, external IR, remote IR through HDBaseT
extenders, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. This IR
remote control can be learned into universal remotes and IR based control systems. An IR All In port is provided,
which allow one IR connecon to control all four remote displays.
The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus
control via a web browser. RS232 commands to remote displays can either be tunneled directly to the displays or
be embedded in the control stream through the matrix from both the RS232 and Ethernet control ports, which will
reduce the number of serial ports required for the control system.
Product Overview
Package Contents
Please verify the following items are in the shipping box prior to installaon of the INT-44HDX.
INT-44HDX Matrix Switcher
Rack Ears with Screws - 2 ea
Shelf Feet with Screws - 4 ea
US Power Cable
Power Supply
RS232 Cable
Removable 3-pole Terminal Blocks (installed on matrix) - 8ea
Infrared Receiver
Infrared Remote Control
AAA Baeries - 2 ea

Table of Contents