Intellian t130Q - Page 79

79
OPERATING THE ACU
SELECT PROCESS TYPE*
BACKUP USER DATA: To backup the antenna settings set by user to the ACU.
RESTORE USER DATA: To restore the antenna by using the backup user data
stored from the ACU.
DEFAULT ACU-REMOTE P/W: to default ID and Password of the Web Server.
UPGRADE FROM USB: to upgrade the system by using the rmware les from
a specied folder in the USB ash drive.
COPY LOG TO USB: to copy the antenna log data from the system to the USB
ash drive.
BACKUP TO USB: To backup the antenna settings to a specied folder in the
USB ash drive.
RESTORE FROM USB: To restore the antenna by using the backup user data
from a specied folder in the USB ash drive.
UPGRADE ACU-REMOTE: To upgrade the system using the Aptus Web rmware le
from a specied folder in the USB ash drive.
NOTE: UPGRADE FROM USB, COPY LOG TO USB, BACKUP TO USB, RESTORE FROM USB and
UPGRADE ACU-REMOTE options are displayed only if the USB ash drive is plugged into the USB
port located in the front panel of the ACU.