LED Indicators
LED Color Indication
Network
Green On = Network link
Orange Flashing = Network activity
Power
Red Steady red for booting up process
Blue Turns blue upon completion of start-up
Purple Flashing during firmware upgrading
Unlit Off when press reset button is pressed
SD Card Orange
Steady orange means SD card is ready
Flashing when SD card is being accessed
Factory Reset
Reset: With the camera turned on, press the reset button briefly to
reboot the camera, or hold the reset button for 10 seconds to set all
settings back to factory default values.
Digital In-/Ouput & 12 V DC Power Input
To Next Page
Loading...
Need help?
General
