table of contents //
Introduction / Registration 2
Unboxing 4
Get Charged / Build 5
Connect the System. 7
Suspension Setup 8
Frame Features / Component Spec 10
Geometry 11
Exploded View and B.O.M. 12
Torque Chart 15
Unique Identiers 16
About the Battery 17
Installing / Removing Battery 20
Turning the Power On / Off 22
Cycle Computer Display and Setting 23
Assist and Shift Switches 24
Maintenance 26
Troubleshooting 28
E-bike Declaration of Conformity 30
At Intense, we have one goal -
to provide the ride of your life //
Our team of designers, engineers and product experts are focused on
one thing every day: your experience on the bike. We build bikes that
are as thrilling to look at as they are to ride, and we build them for the
select few of you who understand the difference and refuse to settle for
anything else. From the early days of Intense, when founder Jeff Steber
worked alone in his garage to today, where a crew of talented people work
in a Temecula, CA factory, Intense has been a brand built on passion by
forward thinkers who, even today, love nothing more than to throw a leg
over a sweet bike and head out for a rip. We’re so glad you’ve joined us.
Welcome to Intense, enjoy your experience.
the tazer //
More than an eBike, think of the Tazer as an Intense bike that happens
to have an E-assist feature. Built with aggressive trail geometry, Jeff
Steber tuned kinematics and 29”/27.5” front and rear wheel sizes, this
bike delivers a unique ride for an eMTB that won’t feel cumbersome and
has a seamless pedal-to-power transition.
#NOSHUTTLEREQUIRED
register your bike //
www.intensecycles.com/warranty-card/
technical assistance
techcenter@intensecycles.com
951 - 307-9 211
Welcome to
th e fam i ly
2 // tazer user manual INTENSE CYCLES // 3
To Next Page
Loading...
