intensity RM12F - 5. Operating Methods

12
Operating the Remote Controller
Lock
ECO
Auxiliary heater Shows that auxiliary heater is on
5. Operating Methods
5.1 On/Off Operations
1) Press (see Figure 3.3), Indoor unit starts to run;
Figure 3.3
2) Press again. the indoor unit stops running.In power-off status,
modes are displayed.
5.2 Mode and Temperature Operations
1) Press (see Figure 3.4). Display screen shows the operating
Figure 3.4
Shows that ECO function is on
Shows that the remote controller
button is locked
Signal transmission
Displays signal sent to the indoor
unit from the remote controller
Horizontal swing Shows that Horizontal Swing is on
Vertical swing Shows that Vertical Swing is on