3
A-60/120
PUBLIC ADDRESS AMPLIFIER
Features
Features
- HIGH POWER, LOW DISTORTION
60W (A-60) or 120W (A-120) of RMS power, with less than 1% THD.
- VERSATILE AND EASY TO USE
Three Mic inputs, two Aux Inputs.
- PRIORITY MUTING
Mic1 input mutes other inputs when in use.
- FLEXIBLE DESIGN
Mono 4Ω or 70V/100V High-Impedance Outputs.
- TONE CONTROL
Separate Bass and Treble controls to tailor your sound.
Accessories
One detachable AC power cord is provided for use with this product.
Operation
Operation
Make certain that speakers and input sources are properly connected before switching on.
Keep volume levels turned down before switching on.
NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This is
due to the built-in protection circuitry, designed to protect speakers and other system components.
To Next Page
Loading...
