AUDIO OVER ETHERNET
3
AOE-N300
Features
Contents and Accessories
Contents and Accessories
1. AC Power Cord x 1EA
2. 3P Terminal Block x 4EA
3. 4P Terminal Block x 2EA
4. 16P Terminal Block x 2EA
5. RS-232C Cable x 1EA
6. Rack Mount Screw x 4EA
7. LAN Cable x 1EA
※ Notes on network setup
1. AOE-N300 can be configured with IP as dynamic or static.
2. AOE-N300 uses 5454~5474 port, required for port forwarding or DMZ setting.
3. When using a WAN environment, use a public static IP or dynamic IP provided by an Internet service
provider.
4. It is recommended to use a dedicated network.
Features
- REAL TIME 2 CHANNEL AUDIO SIGNAL TRANSCEIVER (TRANSMITTER/RECEIVER) Ethernet to 2channel analog
audio signal real time transmitter, receiver.
- FULL-DUPLEX DATA COMMUNICATION TO ETHERNET NETWORK.
It supports IN/OUT contact data transmission/reception (8 channels each), and serial data
transmission/reception (RS-232C, RS-422)
- EXPANSION OF DEVICE
AOE-N300 supports Multicast (1:70) and Unicast (1:20), making it easy to expand
Overview
Overview
AOE-N300 was developed as a device for remote installation. It enables AUDIO & DATA transmission with a
distributed structure of medium/large-scale broadcasting facilities, when there is a limit to the distance
between audio and data lines, using TCP/IP Ethernet Network to respond to the system.
To Next Page
Loading...