EMERGENCY COMBINATION SYSTEM
3
ECS-9216
Features
Features
- PRIORITY CONTROL
It controls the priority of emergency, timer, remote1, remote2, main(normal).
- AUTO FIRE SENSOR
The fire alarm will be given automatically to the designated areas by detecting fire sensor input.
- SPEAKER SWITCHING ON EMERGENCY OR NORMAL(MAIN)
You can control the speaker relay on emergency or normal(main) mode by using the speaker switch on front
panel.
- DISPLAY STATUS
You can easily check the priority status.
- 2 AND 3 WIRE SPEAKER LINE SYSTEM
You can control the speaker line on the 2 wire system or 3 wire system.
- EXTENSION FUNCTION
You can easily expand by connecting additional ECS-9216.
Operation
Operation
1. Supply the power.
2. The fire alarm will be given automatically if the fire sensor signal is detected.
3. Select the speak channel after selecting on Emergency or Normal. On Normal mode, the speaker channel led
is displayed on green. On Emergency mode, the speaker channel led is displayed on red.
4. The all switch is for selecting all 16 speaker channels.
5. The priority is EMERGENCY > TIMER > REMOTE1 > REMOTE2 > MAIN. The priority status is displayed on
the priority status led.
Make certain that speakers and input sources are properly connected before switching the unit on.
Keep volume levels turned down before switching on.
NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This
is due to the built-in protection circuitry, designed to protect the speakers and other system components.
To Next Page
Loading...