EMERGENCY COMBINATION SYSTEM
5
ECS-9216
Rear Panel
Rear Panel
1. REMOTE MIC STATION 1 CONNECTOR
This connector is for input of Remote Mic station 1(Inter-M RM-916).(Figure 1)
2. REMOTE MIC STATION 2 CONNECTOR
This connector is for input of Remote Mic station 2(Inter-M RM-916).(Figure 1)
3. EMERGENCY PANEL CONNECTOR
This output connector controls the Inter-M EP-9216.(Figure 2)
4. FIRE SENSOR INPUT CONNECTOR
This connector is for input of fire sensors.(Figure 3,4)
5. COMMON TERMINAL
This terminal is for use of fire sensor common.
6. POWER DISTRIBUTOR TERMINAL
This terminal controls the Inter-M Power Distributor(ex: PD-9359). This is connected to the remote control
switch of Power Distributor.
7. TIMER SWITCH TERMINAL
This terminal is for input of the Inter-M Timer(ex: PW-9242N). This is connected to the timer switch of Inter-M
Timer. All speaker channels will be selected when the timer switch is on.
8. LINK IN CONNECTOR
This connector is for extension of additional ECS-9216. This is connected to the link out of an additional ECS-9216.
To Next Page
Loading...