22
FEATURES
• HIGH POWER AND HIGH FIDELITY
The designed sound level can be obtained without using the full power output. To insure stability and fidelity
against various protection circuitry is provided.
• DUAL POWER
P series amplifier has to be separated power. If one channel is break down, this amplifier can be perform well
by another channel.
• VARIOUS DISPLAY
To confirm the operating status, LED displays of TEMP-PROT, CLIP-LIM, SIGNAL and POWER are provided
of front panel.
• INPUT PARALLEL AND BRIDGED MONO FUNCTION
These stereo amplifiers can be used for bridged mono and input parallel function by selecting the mode
switch.
• HIGH EFFICIENCY OUTPUT CIRCUIT
To perform of high efficiency, these amplifier be used to 2 or 3 step output circuit. (3 step-P3200, 2 step-
P2000)
• VARIOUS PROTECTION CIRCUIT
To insure stability and reliability against over current, overheating, output short, DC fault detection, clip-limiter,
output fuse and RF protection circuitry is provided.
• FAN COOLING METHOD
These amplifier has continuously variable speed fan and air flow is front-to-rear.
• COMBINATION INPUT JACK AND LINK OUT
For the convenient use of this system, combination input jacks and XLR output jacks are provided for each
channels.
To Next Page
Loading...
Need help?
General
