PA-920/PA-935 Mixer/Amplifier
5. Mic 1,2,3 Inputs
These 1/4" phone jacks accept a standard mic-level or line-level input. Mic inputs
2 and 3 may be set to line-level with the use of their associated Mic/Aux switches
(see 7-8 below).
6. Mute Controls
When signal is present at Mic 1 or Telephone input, all other inputs are muted.
These controls adjust the level of Mic 1 and Telephone output when muting is in
use.
7. Mic 2/Aux 1 Selector Switch
This switch is used to select between mic level and line level for Mic 2/Aux 1 input.
8. Mic 3/Aux 2 Selector Switch
This switch is used to select between mic level and line level for Mic 3/Aux 2 input.
9. Telephone In Terminal
These terminals are used to connect to a telephone exchange system for paging
purposes.
NOTE: When signal is present on the Telephone Input terminal, all other input
signals (except Mic 1) are muted.
10. Aux Inputs
These inputs are used for connecting line-level sources, such as CD or cassette
deck. When using these inputs, the respective Mic/Aux switches must be set to
their Aux settings.
9
To Next Page
Loading...
