AC40 Instructions for Use - US Page 33
3.6 Setup
Allows the clinician to make changes in certain settings within each test and to change the common
settings for the instrument. A single push will by default enter the selected Test Settings menu. To enter
other settings menus, hold the “Setup” button and use on of the rotary wheels (57)/(58) to select:
To save the settings use “Save all settings as...”.
To use another user setting (protocol/profile) use “Load user settings: ‘name of user setting’....”.
Inside a settings menu, choose between the different settings using the right rotary wheel (58). Change
the individual settings using the left rotary wheel (57). Here an example from the Tone settings dialogue
where “Aided” is in focus:
For a detailed description of the setting dialog, please refer to AC40 Quick Guides found here:
http://www.interacoustics.com/ac40
To Next Page
Loading...
