Interacoustics AT235 Additional Information

AT235 Additional Information Page 28
3.6 Pause
Within a protocol it is possible to implement a Pause. This can be used as a break in between tests or to
give an instruction to the clinician before continuing with or ending a protocol.
When rotating the wheel, the following settings can be selected and changed.
A
Auto run. Once enabled for a test auto run will cause this test to be automatically run as part of
the protocol.
B
While this instruction is selected, press the button to open a pop up in which you
can change the instruction that is shown at the start of the measurement. Connect a pc keyboard
to the USB port of the AT235 for easy typing options including the use of special characters.

Interacoustics AT235 Specifications

General

Brand	Interacoustics
Model	AT235
Category	Measuring Instruments
Language	English