AT235 Additional Information Page 31
The following window will pop up
Use the wheel to select day, month, year, hour or minutes. Use the and
buttons to adjust the number. Press the button to accept the
changes and set the date and time, or press the button to reject any changes
made.
If the AT235 is connected to the Diagnostic Suite, your PC will automatically update the date and
time.
Under Printer type you can select which printer is connected to the USB port of your AT235. By
default, the Sanibel MPT-III thermal printer is selected. The list below shows the currently
supported printers.
Under Printer color mode you can select whether your prints are in black and white or 3 color
(CMY) or 4 color (CMYK) mode.
In addition, the following buttons are available:
Install allows you to install new firmware on the AT235. When pressing Install
the instrument will look for a USB dongle. If there is one or more installation files
available, the installation will commence after confirming this action.
Holding the Language button and rotating the wheel allows selection of one of
the available languages. Note that the system needs to be restarted before the
new language setting is employed.
To Next Page
Loading...
Need help?
General
