Troubleshooting
If your PS4 controller isn’t working…
● Verify that the controller is paired with the Pi by confirming that the LED on the front of
the controller is blue. If it’s flashing white or not on, try repeating the PS4 Controller
Setup. If the LED is a different color like red, green, or pink, that means your controller is
paired with the Pi but connected to the wrong port. Most likely, this is because another
controller is already paired with the Pi.
● Make sure that your controller is charged
● Restart the Pi and try again
Your monitor is not displaying anything…
● By default, if the Pi does not detect a monitor plugged in at boot, it will not display
anything, even if the monitor is plugged in later. To use the monitor, make sure it’s
plugged into the Pi before turning the Pi on.
To Next Page
Loading...
Need help?
General