Interface BSC4 - Com Ports; Adding a Single Channel

BSC4 Quickstart Guide
Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555 ● Fax 480.948.1924
www.interfaceforce.com ● Email: contact@interfaceforce.com ● 800.947.5598
Document Number 15-314 Rev A Page 7 of 12
COM Ports
1. Once windows is finished installing the device navigate to Device Manager and check for a new USB Serial Port
(COMX) where X is the assigned port number. Remember this number. In the examples below it is COM6.
Adding a Single Channel
1. Run BlueDAQ from the start menu. After the program launches click “ADD CHANNEL”
2. In the Add Channel dialog box
2.1. Click Devicetype drop-down and select BSC4, BSC8, BX8, or BSC2 (9330)