To Next PageTo Next Page
Need help?Do you have a question about the Interface BSC4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power Supply | 100-240V AC, 50/60 Hz |
| Inputs | 4 x XLR |
| Outputs | 4 x XLR |
| Frequency Response | 20Hz - 20kHz, ±0.1dB |
| THD+N | <0.001% |
Describes the BSC4A model with analog output and power supply.
Describes the BSC4D model with USB output and software.
Details the pin configuration for the 37-pin Sub-D connector.
Details the pin configuration for the 5-pin M12x1 connector.
Details the pin configuration for the 15-pin Sub-D output connector.
Details the connection assignments for the 25-pin Sub-D port.
Illustrates full bridge connections using the 37-pin connector.
Illustrates half bridge connections using the 37-pin connector.
Illustrates quarter bridge connections using the 37-pin connector.
Illustrates full bridge connections using the M12 connector.
Illustrates half bridge connections using the M12 connector.
Illustrates quarter bridge connections for PT1000 sensors with M12.
Options for saving recorded data to memory.
Settings for controlling the start, stop, and conditions of recording.
