Interface BSC4 User Manual

BSC4 Operating Manual
Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555 ● Fax 480.948.1924
www.interfaceforce.com ● Email: contact@interfaceforce.com ● 800.947.5598
Document Number 15-183 Rev B Page 32 of 74
6 Example scaling a channel using model WMC-100 load cell with 100 lbf capacity and 1.9587
mV/V output. After entering the values into the dialog box you must click “Calculate” and then
“OK/Set”.
FIGURE 23 - EXAMPLE OF CALIBRATION FOR A WMC-100 LOAD CELL
Distance Offset
1. To change the distance of the origin, this setting may be access in the sensor option
2. Select the corresponding direction and the distance.
3. Can be set in meters or millimeters.
Press Calculate to scale and then OK/Set to save

Interface BSC4 Specifications

General

Brand	Interface
Model	BSC4
Category	Amplifier
Language	English