Chapter 5: Menu reference
136 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
1.2.9.1 Test options
Use this menu to configure an automatic battery test.
First, select the panel or an expander to test the battery.
1.2.9.1.m Select device type
1>Expander 1
2 Expander 2
Select the appropriate device group.
1.2.9.1.m.n Select device
Select the appropriate device.
1.2.9.1.m.n.1 Duration
Set duration (in minutes) for battery test.
Allowed range is 2 to 254.
1.2.9.1.m.n.2 Batt.test freq
2 Batt.test freq
>Disabled<
Set automatic battery test frequency. The following values are available:
• Disabled
• Every working day
• Every Monday
• First Monday of month
• Everyday
1.2.9.2 Man. Bat. test
The menu allows you to perform a manual test of the device battery.
1.2.9.2.m Select device type
Select the appropriate device group.
To Next Page
Loading...
Need help?
General
