Chapter 3: System functions
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 91
Autoset
The Advisor Advanced system allows autoset configuration. The system can be
set automatically via schedule.
The following options must be considered when providing an autoset facility.
• Using menu “7 Calendar” on page 225, create an action with Set function.
See also “User programmable functions” on page 88.
• Configure an appropriate schedule using the menu “7.2 Schedules” on page
226.
• Enable or disable “4.2.n.5.3 Silent autoset” option on page 188.
• If necessary, set “4.2.n.5.2 Set retry” option on page 188.
If Set retry is allowed, configure “8.4.8 AS user retry” on page 245.
• Set “4.2.n.4.1 Warning time” option on page 187 as well.
• Optionally, configure “8.4.7 AS fault retry” option on page 245.
To Next Page
Loading...
