Chapter 5: Menu reference
226 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
7.1.n.3 Special day
Enter the menu to configure the selected day as a special day.
For more information, see Chapter 3 “System functions > Special days in
schedules” on page 78.
7.1.n.3.1 Day type
Choose a type for the selected day:
• Normal day: A normal day. A special day time frame is not valid.
• Holiday, Special day 2 etc.: The day is one of special days defined in “7.2.n.6
Special days” on page 230.
7.1.n.3.2 Recurring
If set to Yes, the special day repeats every year. Otherwise, it is valid only once
on the defined date.
7.1.n.3.3 Until date
3 Until date
>10.03.2016<
If the end date is set, the special day object will cover a time period from the
selected day to the end date set in the Until date menu.
Note: A time period overwrites other special days in case of overlapping.
7.2 Schedules
0>Add Schedule
1 Schedule 1
Each panel action performed automatically can be driven by up to two schedules.
Use the Schedules menu to add and modify schedules.
The maximum schedule number in the system is given in “General features” on
page 36.
For more information on schedules see “Schedules” on page 77 in Chapter 3
“System functions”.
To Next Page
Loading...
Need help?
General
