Chapter 3: System functions
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 103
Timed unset / ATM
ATM (automatic teller machine) is secured with an additional functionality that
includes the following:
• Double code unset. The ATM user must enter the code, and then enter it
again after the programmed delay period.
The delay is set in “8.9.1 Delay” on page 256.
After this delay, the user is prompted to enter the code again.
The user must belong to a user group with Timed unset / ATM type. See
“3.2.n.2 User group type” on page 168 for details.
• Timed unset. The ATM is unset for a programmed time period. This period is
defined in “8.9.2 Unset Time” on page 257.
The keypad displays the remaining unset time.
• Extended time. The user can extend the unset time for an additional time
period, if this period is set in “8.9.3 Ext Unset Time” on page 257 as longer
than 0.
Time left 11 min
* to extend time
Press * to extend the unset time. The unset time can be extended only once.
Note: The Timed unset / ATM functionality is only available on LCD keypads.
To Next Page
Loading...
Need help?
General
