Chapter 5: Menu reference
168 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
• Visitor: Requires a code or card from a user who has a Guard user type.
• High security user: only when required number of those users is reached
within a high security region, normal users are also permitted to be inside.
See “High security” on page 70 for details.
3.2 User groups
The User group program block is used to record information about user groups.
User group settings
3.2.0 Add UG
Access the menu to add a user group. If the user group is created successfully,
the following message appears:
The new user group is given the default name “UG N” and placed on the end of
the user group list. You can now start editing the user group details for the new
user group.
3.2.n Select user group
To edit a user group, select a user group first.
The following options can be configured.
3.2.n.1 User group name
1 UG name
>User group 6 <
Use the UG name option to set the user group name. Press Enter to edit the
name, or Clear to exit.
The user group name can have up to 16 characters.
3.2.n.2 User group type
Choose a type of the selected user group.
For detailed user group type description and available user group types, see
“User group types” on page 62.
To Next Page
Loading...
Need help?
General
