Chapter 5: Menu reference
270 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
One of the following dial tone options can be selected:
• None
• Default (CTR21)
• UK
• Other (Netherlands)
9.3.n.6 Dialing
The Dialling menu allows you to select the PSTN dial mode: pulse or tone
(DTMF).
ISDN specific options
9.3.n.6 Point to Point
The option must be set to Yes if the ISDN dialler uses point-to-point connection,
otherwise it should be set to No.
Contact your ISDN provider for details on the service.
9.3.n.7 MSN
The MSN option lets you enter the ISDN MSN number.
IP specific options
9.3.n.3 Transm path
The Transmission path option is a read-only field that identifies a communication
method used for this transmission path.
9.3.n.4 IP config
The IP config menu allows you to configure the panel IP address.
The following options are configurable in this menu.
To Next Page
Loading...
Need help?
General
