Interlogix ATS3500A-IP-MM Installation And Programming Manual

Chapter 3: System functions
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 65
#
Option
Description
8.
User adding
Create new users (see also “User privilege limitation” on page 64).
9.
Forced set
Perform a forced set.
The availability of this option depends on the system configuration.
10.
Change PIN
Change own PIN.
11.
Walk test
Perform a walk test.
12.
Engineer reset
Perform an engineer reset.
13.
Duress code
Use a duress code.
14.
Reporting tests
Make a test call to the particular central station.
15.
Remote connection
Respond to a remote access request.
16.
Cleaner
Leave zones inhibited after the unset.
17.
User group area list
Display the list of areas.
18.
Menu access
Enter the user menu.
19.
Inst. access
Grant the Installer an access to the system configuration.
20.
Logs access
Access the panel logs.
21.
Stop report
Stop reporting in progress.
22.
SMS reporting
Receive SMS reports.
23.
SMS control
Control the system via SMS.
24.
Card and PIN mode
Set the mode for this particular user group (if possible). The
following modes are available:
• PIN only
• Card only
• Card or PIN
25.
No OP/CL reports
Open/close events generated by users of the user group are not
reported
26.
Schedule access
Access to schedule. The following options are available:
• None: No access
• View: Restricted access. Users can view schedule and cancel
actions for the present day.
• Configure: Full access.
27.
Fob learning
Program a fob.
28.
Remote pics
Enable remote picture triggering.
29.
Pic deletion
Delete pictures.
30.
CS configuration
Configure CS communication.
31.
Shunt
Shunt zones.
32.
Door control
Control door state: lock, unlock, open, timed open, enable and
disable.
33.
Region ctrl
Move users between regions.

Interlogix ATS3500A-IP-MM Specifications

General

Brand	Interlogix
Model	ATS3500A-IP-MM
Category	Security System
Language	English