Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 169
3.2.n.3 User group areas
01-10>UG areas
1.........
The User group areas option defines which areas the user can control.
3.2.n.4 User group AG
The UG area group option defines which area groups the user can control.
3.2.n.5 User group filter
When using a filter, the user rights defined by the user group depend on this filter
state.
For more information on condition filters, see “6.1 Condition filters” on page 217.
3.2.n.6 User group options
User group options define the user access rights to the particular options.
Available options are listed in “User group options” on page 64.
3.2.n.7 Schedule
Select schedules for the selected user group.
The shortcut menu allows you to assign up to two schedules to each of the
following elements:
• 1 Privileges
• 2 Area access
See “Schedule shortcut menu” on page 78 for more information.
3.2.n.8 Remove user group
To remove a user group, select a user group using the cursor, or by entering the
user group number, and go to the Delete UG menu.
The display shows:
Choose Ok and press Enter. This removes the user group.
Repeat the command to delete other user groups, or press Clear to exit and
return to the higher menu level.
To Next Page
Loading...
Need help?
General
