Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 201
5.1.n.6.3.4.3 EE PIN lock
If the EE PIN lock option is set to Yes, it is not possible to use a PIN during the
entry time.
The option is equal to “2.2.1 Keypad devices > 2.2.1.n.3.8 EE PIN lock” on page
146.
5.1.n.6.4 RTE options
Configure RTE (Request to exit) functionality options.
5.1.n.6.4.1 Use reader RTE
Specify if the Request To Exit input is enabled on the reader.
First, select the appropriate IN or OUT reader. Next, set Yes or No to configure
the option for the specified reader.
For options related to intelligent doors, see “Intelligent door specific options” on
page 204.
5.1.n.7 Schedule opts
The menu allows you to configure schedule options for the selected door.
5.1.n.7.1 Door unlocked
Configure schedule options for the door unlock.
5.1.n.7.1.1 Schedule
Select schedules for the door unlock.
The shortcut menu allows you to assign up to two schedules to the selected
element.
See “Schedule shortcut menu” on page 78 for more information.
5.1.n.8 Shunt options
Use the menu to set up door shunt options for the door.
To Next Page
Loading...
Need help?
General
