Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 275
the system automatically selects another network, if the configured network is
unavailable.
9.3.n.5.2.3 Net.scanning
The Network scanning menu lists all available networks. It also lets you force
another scan.
The list contains GSM network names that are preceded by one of the following
marks that define the network availability:
• *: The network is currently connected.
• +: The network is allowed for connection.
• -: The network is forbidden for connection.
If the network name is unknown (not recognized by the GSM dialler), the network
code in square brackets is displayed instead of the name, for example,
“+ [20999]”.
9.3.n.5.2.3.0 Rescan nets
Scan in progress
Please wait
The Rescan nets command performs a GSM network scan.
The scan can take a few minutes. You can cancel the scan by pressing Clear.
9.3.n.5.2.3.m Select a network
Select a network to see more options.
9.3.n.5.2.3.m.1 Network name
The Network name is the name of the GSM network. Refer to “1.2.8.6 Network
name” on page 134 for more details.
9.3.n.5.2.3.m.2 Network code
The Network code is the unique code of the GSM network. Refer to “1.2.8.7
Network code” on page 134 for more details.
To Next Page
Loading...
Need help?
General
