Appendix A: Advisor Advanced events
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 315
User/Installer Walk test is active
Zone in walk test is activated
A-alarm active (unconfirmed
alarm), reset after unset or
expiration of AB timer and no B-
alarm.
B-alarm active (confirmed
alarm). Reset after unset
Internal siren. Activated on
alarm during the internal siren
time. Activation may be delayed
by Siren delay time.
Can be retriggered by next
alarm.
External siren. Activated on
alarm during the external siren
time. Activation may be delayed
by Siren delay time.
This flag can not be retriggered.
Strobe output. Activated by
alarm during Set. Deactivated
after unset.
Activated during set procedure
to reset AM detectors
Area is in part set 2 state.
Area in warning state prior to
autoset
Autoset procedure is in progress
Zone inhibit limit is reached
Zone isolation limit is reached
Zone shunt limit is reached
ATM unset delay is active
ATM unset warning time is
active
Extended ATM unset time is
active
A zone in the area is shunted
To Next Page
Loading...
Need help?
General
