Interlogix ATS4500A-IP-MM

Programming map
352 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
1.2.6 Test call opts
1.2.6.n Select CS
1.2.6.n.1 Test call mode
1.2.6.n.4 Extend
1.2.6.n.2 Test call time
1.2.6.n.5 Freq TC if FTC
1.2.6.n.3 Period
1.2.6.n.6 Man. test call
1.2.7 IP diagnostic
1.2.7.n Choose interface
1.2.7.n.1 IP statistics
1.2.7.n.4 Ping CS
1.2.7.n.2 Ping host
1.2.7.n.5 NTP status
1.2.7.n.3 Ping PC
1.2.8 GSM diagnostic
1.2.8.1 PIN status
1.2.8.7 Network code
1.2.8.3 GSM net.reg.
1.2.8.8 RSSI
1.2.8.4 GPRS net.reg.
1.2.8.9 Msg sent 24h
1.2.8.5 GPRS state
1.2.8.10 Battery status
1.2.8.6 Network name
1.2.9 Battery test
1.2.9.1 Test options
1.2.9.1.m Select device type
1.2.9.1.m.n Select device
1.2.9.1.m.n.1 Duration
1.2.9.1.m.n.2 Batt.test freq
1.2.9.2 Man. Bat. test
1.2.9.2.m Select device type
1.2.9.2.m.n Select device
1.2.9.2.m.n.1 Duration [min]
1.2.9.2.m.n.2 Run/Stop test
1.2.9.3 Battery replaced
1.2.10 Panel diag
1.2.10.1 System V/A
1.2.10.2 Battery (V)
1.2.11 Check card
1.2.12 Demo mode
1.2.13 Door control
1.3 Software Mgmt
1.3.1 Software Rev
1.3.2 Panel language
1.3.3 Defaults
1.3.4 USB upgrade
1.3.4.1 FW Upgrade
1.3.4.2 FW Upload

