Interlogix ATSx500A Series - Page 43

Chapter 2: Installation
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 37
Maximum user number (for users with
SMS and voice reporting functionality)
50
200
1000
User groups
16
64
128
Inhibit / isolate / shunt limit, max.
32
128
512
Schedules
24
Time frames
4 per schedule
Special days
8
Actions per schedule
20
Event log capacity
Note: See also “Events” on page 79.
15500, which includes:
- 1000 mandatory events
- 1500 non-mandatory events
- 10000 access events
- 1000 installer events
- 1000 dialler events
- 1000 extended events
Data retention (log, program settings)
20 years
Access control features
ATS1500A(-IP)
ATS3500A(-IP)
ATS4500A-IP
Door controllers supported
7
12
12
Standard doors
4
8
16
Intelligent doors
28
48
48
Regions
256
Door groups
128
Maximum user number (with door
controllers connected)
2000
17488 (with ATS1831 IUM installed)
64532 (with ATS1832 IUM installed)
Note: SMS and voice reporting features are only available for a limited user number. Maximum
number of users with full control and reporting functionality is given in “General features” on
page 36.
Ethernet connection (IP only)
Supported standard
IEEE 802.3u
Speed
10BASE-T or 100BASE-TX
Duplex
Half-duplex and full-duplex
Cabling
FTP (foiled twisted pair) Cat 5e cable or better
Autonegotiation
MDIX
Standard onboard outputs
S1, S2, S3
High current electronic output, rating: 1 A at 13.8 V
S4, S5 [1]
Low current electronic output, rating: 50 mA at 13.8 V
[1] Maximum cable length for low current output connection may not exceed 30 m. For longer
distances, use relay output expansion (for example, ATS624 four-relay expander).