These instructions do not purport to cover all details or variations in equipment nor to provide every possible
contingency to be met during installation, operation, and maintenance. If further information is desired or if particular
problems arise that are not covered sufficiently for the purchaser’s purpose, the matter should be referred to GE
Security, Gladewater, Texas, USA.
This document contains proprietary information of GE Security, USA and is furnished to its customer solely to assist that
customer in the installation, testing, operations, and/or maintenance of the equipment described. This document shall
not be reproduced in whole or in part nor shall its contents be disclosed to any third party without the written approval
of GE Security.
NetworX
™
is a trademark of the GE Security companies.
Symbol Legend
Warning
Indicates a procedure, practice, condition, or statement that, if not strictly
observed, could result in personal injury.
* This symbol indicates electrical warnings and cautions.
Caution
Indicates a procedure, practice, condition, or statement that, if not strictly
observed, could result in damage to or destruction of equipment or property.
** This symbol indicates general warnings and cautions.
Note
Indicates an essential or important procedure, instruction, condition, or
statement.
Tip
Indicates a user tip. Provides helpful information that is not normally defined in
regular use, but from an experienced user.
&
Enter
Indicates a key or button should be pressed to enter data.
NX-1701E Installation manual Page 2 31/01/05
To Next Page
Loading...