Activate One User (Single User)
ACTION RESULT
& [CHIME]
(not available on NX-1248E)
x x x x x x x x
Accesses Activation mode
& [3-digit user number]
Example: X Y [ if 4-digit user code
or
W W X Y [ if 6-digit user codes
x x x x x x x x
If a valid user number is entered, LED1 on any
enabled readers will begin to flash.
Scan any card.
x x x x x x x x
The card information for the user entered in the
previous step will be activated, and LED1 will stop
flashing. After about 30 seconds, all the readers in
the system will be updated.
De-Activate One User
ACTION RESULT
& [BYPASS]
x x x x x x x x
Accesses De-activation mode
& [3-digit user number]
Example: X Y [ if 4-digit user code
or
W W X Y [ if 6-digit user codes
x x x x x x x x
If a valid user number is entered, LED1 on any
enabled readers will begin to flash.
Scan any card
x x x x x x x x
The card information for the user entered in the
previous step will be cleared, and LED1 will stop
flashing. After about 30 seconds, all the readers in
the system will be updated.
If an individual keeps the
card, it can still be deleted.
Delete / Reset One User
ACTION RESULT
& [EXIT]
x x x x x x x x
Accesses De-activation mode
& [3-digit user number]
Example: X Y [ if 4-digit user code
or
W W X Y [ if 6-digit user codes
x x x x x x x x
If a valid user number is entered, LED1 on any
enabled readers will begin to flash.
Scan any card
x x x x x x x x
The card information for the user entered in the
previous step will be cleared, and LED1 will stop
flashing. After about 30 seconds, all the readers in
the system will be updated.
ACTIVATING / DE-ACTIVATING / RESETTING USERS
If User Number 0 is entered, the desired function will be performed on the user
associated with the card scanned.
NX-1701E Installation manual Page 9 31/01/05
To Next Page
Loading...