DECLARATION OF CONFORMITY
SECURITY LIFESAFETY COMMUNICATIONS
MANUFACTURERS DECLARATION OF
CONFORMITY
For
Product identification:
Model/type : NX-1701E BOM revision level : 11 June 2003, 5157D
Category (description) : Smart card reader
Brand : GE-InterlogiX/Caddx
Manufacturer: GE Interlogix PTY, LTD.
646 Whitehorse Road
Mitcham 3132
Australia
EU Representative: GE Interlogix B.V.
Kelvinstraat 7
6003 DH Weert
The Netherlands
Concerning RTTE
EMC Safety Radio
A sample of the product
has been tested by:
Underwriters Laboratories Inc.
GE-ILX CE_qualification_plan: CEQP_NXCS-1700 Test report reference
Report: NC4364-081403
Project No: 03CA26086
BP9453-A2 Report: NC4364-081403
Project No: 03CA26086
Applied standards EN50130-4(1995)
+A1(1998)
EN60950(2000)
IEC60950(1999), 3
rd
Ed.
EN300330-2 v1.1.1 (06-2001)
Equipment class identifier (RF products falling under the scope of R&TTE)
Not Applicable None (class 1 product) X
(class 2 product)
Means of conformity
We declare under our sole responsibility that this product is in conformity with Directive 93/68/EEC (Marking) and/or
complies to the essential requirements and all other relevant provisions of the 1999/5/EC (R&TTE) based on test
results using harmonized standards in accordance with the Directives mentioned.
NX-1701E Installation manual Page 25 31/01/05
To Next Page
Loading...