Interlogix NS3702-24P-4S - Product Specifications

18
1.5 Product Specifications
Product NS3702-24P-4S
Hardware Specifications
SFP/mini-GBIC Slots
4 100/1000Base-X SFP interfaces, shared with Port-21 to Port-24
Compatible with 100Base-FX SFP transceiver
Console
1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
48Gbps / non-blocking
Throughput
35.7Mpps@64Bytes
Address Table
16K entries, automatic source address learning and ageing
Share Data Buffer
4M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory Default
Dimension (W x D x H)
440 x 300 x 44.5 mm, 1U height
Weight
4750g
LED
System:
Power (Green)
FAN1 (Green), FAN2 (Green), FAN3 (Green), PWR (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 24):
10/100/1000Mbps LNK/ACT (Green)
PoE In-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000Mbps (Green), LNK/ACT (Orange)
Power Requirement
100~240V AC, 50/60Hz, 6A
Power Consumption
422 watts / 1447 BTU Max.
ESD Protection
6KV DC
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type End-span
PoE Power Output
Per Port 56V DC, Max. 30.8 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget
440 watts Max.
PoE Ability PD @ 7 watts
24 units