71
4.2.21 Configuration Activate
Configuration Activate page allows to activate the startup-config and default-config files present on the switch. Please refer to the
Figure 4-2-26 shown below.
Figure 4-2-26: Configuration Activate Page Screenshot
It is possible to activate any of the configuration files present on the switch, except for running-config which represents the currently
active configuration.
Select the file to activate and click . This will initiate the process of completely replacing the existing
configuration with that of the selected file.
4.2.22 Configuration Delete
Configuration Delete page allows to delete the startup-config and default-config files which stored in FLASH. If this is done and the
switch is rebooted without a prior Save operation, this effectively resets the switch to default configuration. Please refer to the Figure
4-2-27 shown below.
Figure 4-2-27: Configuration Delete Page Screenshot
To Next Page
Loading...
