66
4.2.15 SMTP Configuration
This Page facilitates an SMTP Configuration on the switch. The SMTP Configure screen in Figure 4-2-18 appears.
Figure 4-2-18: SMTP Configuration Page Screenshot
The Page includes the following fields:
Object Description
SMTP Mode
Controls whether SMTP is enabled on this switch.
SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
SMTP Port
Set port number of SMTP service.
SMTP Authentication
Controls whether SMTP authentication is enabled If authentication is required
when an e-mail is sent.
Authentication User
Name
Type the user name for the SMTP server if Authentication is Enable.
Authentication
Password
Type the password for the SMTP server if Authentication is Enable.
E-mail From
Type the sender’s E-mail address. This address is used for reply e-mails.
E-mail Subject
Type the subject/title of the e-mail.
E-mail 1 To
E-mail 2 To
Type the receiver’s e-mail address.
To Next Page
Loading...
