211
for QoS class and DPL map.
There are two configuration parameters for DSCP Translation –
■ Translate
■ Classify
Translate
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Classify
Click to enable Classification at Ingress side.
Egress
There is following configurable parameter for Egress side -
■ Remap
Remap DP
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.9.10 DSCP Classification
This Page allows you to map DSCP value to a QoS Class and DPL value. The DSCP Classification screen in Figure 4-9-11 appears.
Figure 4-9-11: DSCP Classification Page Screenshot
The Page includes the following fields:
To Next Page
Loading...
