24
NS3702-24P-4S LED Indication Table
LED definition
System
LED Color Function
PWR Green Lights to indicate this switch has powered.
Alert
LED Color Function
FAN1 Green Lights to indicate FAN1 failure.
FAN2 Green Lights to indicate FAN2 failure.
FAN3 Green Lights to indicate FAN3 failure.
PWR Green Lights to indicate Power failure.
Per 10/100/1000Mbps RJ45 Port (Port-1 to Port-24)
LED Color Function
LNK/ACT Green
Lights to indicate the port link is established at 10/100/1000Mbps successfully.
Blinks to indicate the switch is sending or receiving data over that port actively.
PoE In-Use Orange
Lights to indicate the port is providing 56V DC in-line power.
Lights off to indicate the connected device is not a PoE Powered Device (PD).
Per 100/1000Base-X SFP Interface (Port-23 to Port-24)
LED Color Function
Lights. To indicate the port is successfully established at 1000Mbps.
1000 LNK/ACT Green
Blink: To indicate that the Switch is actively sending or receiving data over that port.
Lights: To indicate the port is successfully established at 100Mbps.
100 LNK/ACT Orange
Blink: To indicate that the Switch is actively sending or receiving data over that port.
To Next Page
Loading...
