Need help?Do you have a question about the Interlogix NXG-8-BO and is the answer not in the manual?
Provides essential safety and installation guidance for qualified professionals.
Outlines the power supply requirements, voltage, current, and consumption for the xGenLite system.
Provides a comprehensive list of SIA and CID codes used for event reporting and their corresponding functions.
Details mandatory options and settings required for EN 50131 Grade 2 compliance.
Outlines precautions for installation and programming to ensure EN 50131 compliance.
Explains how the keypad locks in screensaver mode and requires a PIN to unlock, preventing unauthorized access.
Provides instructions on how to arm the system in Away mode using a valid PIN and keypad.
Introduces DLX900 software for PC-based programming and managing complex sites.
Describes using the built-in web server for system setup and programming via a web browser.
Explains using the UltraSync+ smartphone app for system status, arming, disarming, and programming.
Guides on enabling UltraSync+ app access by setting the Web Access Code and installer PIN.
Highlights essential settings to change, such as Installer Code and User PINs, for security.
Guides on adding Z-Wave devices to the xGenLite system via the web server interface.
Details programming system options like time, date, tamper, siren, and service settings.
Provides essential safety and installation guidance for qualified professionals.
Outlines the power supply requirements, voltage, current, and consumption for the xGenLite system.
Provides a comprehensive list of SIA and CID codes used for event reporting and their corresponding functions.
Details mandatory options and settings required for EN 50131 Grade 2 compliance.
Outlines precautions for installation and programming to ensure EN 50131 compliance.
Explains how the keypad locks in screensaver mode and requires a PIN to unlock, preventing unauthorized access.
Provides instructions on how to arm the system in Away mode using a valid PIN and keypad.
Introduces DLX900 software for PC-based programming and managing complex sites.
Describes using the built-in web server for system setup and programming via a web browser.
Explains using the UltraSync+ smartphone app for system status, arming, disarming, and programming.
Guides on enabling UltraSync+ app access by setting the Web Access Code and installer PIN.
Highlights essential settings to change, such as Installer Code and User PINs, for security.
Guides on adding Z-Wave devices to the xGenLite system via the web server interface.
Details programming system options like time, date, tamper, siren, and service settings.
General| Model | NXG-8-BO |
|---|---|
| Manufacturer | Interlogix |
| Zones | 8 |
| Hardwired Zones | 8 |
| Wireless Zones | 0 |
| Partitions | 1 |
| Keypads Supported | Up to 4 |
| Input Voltage | 16.5 VAC |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Humidity | Up to 93% non-condensing |
| Weight | 1.4 kg (3 lb) |
To Next Page