Need help?Do you have a question about the Interlogix TruVision NVR 11 and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Video Output | HDMI, VGA |
| Operating System | Embedded Linux |
| Model | TruVision NVR 11 |
| Recording Resolution | 1080p |
| Audio Input/Output | 1 input, 1 output |
| Network Protocols | TCP/IP, DHCP, DNS, DDNS, NTP, SMTP, UPnP |
| USB Interface | 2 USB 2.0 ports |
Defines the types of advisory messages like WARNING, CAUTION, and NOTE used throughout the manual.
Describes the NVR's features, PoE, dual streaming, and software integration.
Provides contact details and resources for manuals, tools, and firmware.
Discusses factors like ventilation, temperature, moisture, and chassis load for installation.
Instructions for checking product package contents upon receipt.
Describes the connections and ports on the recorder's back panel.
Details supported resolutions and usage of VGA and HDMI monitors.
Provides instructions on mounting the recorder using rack mount ears.
Instructions on how to turn on, turn off, and reboot the recorder.
Explains how to set a secure administrator password upon initial startup.
Guides through basic recorder configuration settings like language, resolution, and network.
Outlines the different methods available to control the recorder's functions.
Describes the buttons, LEDs, and their functions on the recorder's front panel.
Explains how to use a USB mouse to navigate and operate the recorder's interface.
Details how to use the infrared remote control unit to operate the recorder's functions.
Describes the live view mode as the normal operating state for watching live camera images.
Explains system and camera status icons displayed on the monitors.
Details the HDMI and VGA ports and their usage for monitor connections.
Describes how to access features quickly using the mouse right-click menu in live view.
Explains how to switch between single camera display and multiple camera layouts.
Describes how to set up cameras to display sequentially on the screen.
Explains the icons and functions available in the live view toolbar for quick access.
Details how to zoom in and out of camera images in live view and playback.
Explains how to call up predefined PTZ camera positions and tours.
Explains how to search videos by time, date, events, bookmarks, and snapshots.
Describes how search results are displayed and how to play back selected files.
Details how to search recorded video by time and date, and by event types.
Guides on how to search for recorded files that have been bookmarked.
Explains how to search and view saved snapshots of recorded video.
Describes how to quickly replay the most recently recorded video segments.
Explains how to adjust the preprogrammed time period for instant replay.
Introduces the 24-hour playback window and its features for managing recorded video.
Details the controls for manually managing video playback in the 24-hour view.
Explains how to access and play back one day's recorded video for a selected camera.
Lists and describes the seven different modes available for 24-hour playback.
Describes how to selectively play back VCA, alarm input, and motion events.
Details how to play back recordings, skipping non-event video segments.
Explains how to view simultaneous 24-hour playback recordings split across multiple screens.
Covers adjusting playback speed and setting skip times for navigating recorded video.
Explains how to play back video one frame at a time for detailed examination.
Describes how to play back files that have been archived onto a backup device.
Explains how to view saved snapshots using the search or 24-hour playback modes.
Details how to use digital zoom for closer inspection of images during playback.
Guides on saving important scenes as video clips from recorded files.
Explains how to bookmark important scenes in recorded files for later reference.
Describes how to lock recorded files to prevent them from being overwritten.
Covers managing video clips, locked recordings, and bookmarks on a backup device.
Explains the two methods available for archiving files: Quick Archive and from Search Results.
Describes how to archive specific files found through the search function.
Guides on exporting recorded files from the recorder to a backup medium.
Explains how to archive video clips and locked files created during playback.
Describes how to include multiple files in a TruVision Player playlist.
Details exporting video and snapshots using TruVision Navigator software.
Explains how to adjust settings like multiview layout, time bar, and audio output.
Describes how to define the layout of different views and the order of cameras displayed.
Lists the types of cameras supported by the recorder, including IP cameras and encoders.
Explains how to add, edit, remove, and update IP cameras connected to the recorder.
Details the process of connecting IP cameras to the recorder via LAN or PoE ports.
Explains how to configure image quality and resolution for snapshots.
Describes how to configure on-screen display settings for camera information.
Guides on adjusting brightness, contrast, saturation, and hue for individual cameras.
Explains how to enable/disable motion detection, create motion grids, and set sensitivity.
Describes how to define areas on screen to be hidden from view and recording.
Details how to set up the recorder to detect camera tampering and trigger alerts.
Explains how to set cameras to be visible only to specific users.
Guides on configuring Video Content Analysis events and linking them to alarms.
Explains how to quickly move PTZ cameras to predefined positions and record movements.
Details the process of defining and saving a preset location for a PTZ camera.
Instructions on how to recall a previously saved preset position for a PTZ camera.
How to remove a saved preset position from the PTZ camera configuration.
Steps to create a sequence of PTZ camera movements between presets.
How to activate a previously configured preset tour for a PTZ camera.
How to remove a preset tour from the PTZ camera configuration.
Guides on recording and saving manual PTZ camera movements as a shadow tour.
Explains how to enable V-stream encoding for remote viewing with limited bandwidth.
Details general network configuration, including IP addresses and ports.
Instructions for configuring PPPoE settings to connect directly to a DSL modem.
Explains how to set up Dynamic DNS services for connecting via a dynamic address.
Details how to configure a Network Time Protocol server for accurate date and time.
Guides on configuring the recorder to send email notifications for alarms or events.
Explains how to set up an FTP server for storing snapshots of events or alarms.
Details how to configure SNMP protocol settings for network management systems.
Explains how to enable Universal Plug and Play for automatic port forwarding.
Guides on testing network delay and packet loss for performance checks.
How to confirm that all network parameters are operating correctly.
Instructions on exporting captured network data packets to a USB drive.
Explains how to check bandwidth usage for remote live view and playback.
Details how to define allowed or forbidden IP addresses to control system access.
Explains the necessary ports to forward for internet connection and remote access.
Explains how to specify when the recorder records video and which settings are used.
Steps to set up a daily recording schedule using the visual schedule map.
Alternative method to set up a daily recording schedule via the Edit menu.
Explains how to change the preprogrammed time for instant playback.
Details how to manually record video during live view.
Guides on configuring external alarm devices connected to the recorder.
Explains how the recorder can notify users about alarms or events.
Details how to connect the recorder to an alarm system and schedule output triggers.
Describes how to manually trigger or clear alarm outputs of the recorder.
Explains how to configure the duration of warning buzzers for alarms.
Covers selecting alarm and event notifications to be displayed in the live view.
Guides on setting up detection for video loss and triggering system notifications.
Details how to set up a remote alarm host to receive signals when an alarm is triggered.
Explains the integration of Interlogix intrusion panels for reporting events.
Guides on setting the date, time, and daylight saving time for the recorder.
Details how to configure general options like language, device name, and startup wizard.
Explains how to export and import recorder configuration settings for backup or transfer.
Guides on resetting the recorder to factory default settings.
Details the methods for updating the recorder's system firmware.
Explains how to create separate recording schedules for holiday periods.
Covers enabling or disabling RTSP, ISAPI, and HTTP protocols.
Explains how to check the status of installed HDDs on the recorder.
Describes how the recorder responds when HDDs become full, with overwrite enabled by default.
Guides on adding network-attached hard drives (NAS/SAN) to the recorder.
Covers controlling individual camera storage capacity using HDD quota management.
Explains how to view and interpret S.M.A.R.T. information for HDDs.
Explains how to improve HDD performance by detecting and managing bad sectors.
Guides on creating new user accounts with specific access levels and permissions.
Explains how to customize access privileges for Local, Remote, and Camera configurations.
Details settings that can be enabled or disabled for cameras based on user roles.
Instructions for system administrators on how to delete user accounts.
Describes how a system administrator can change a user's name, password, or access level.
Guides on how to change the administrator's password through the User Management menu.
Explains how to access device information, including model, serial number, and firmware version.
Details how to view status, motion detection, tamper proof, and video loss for each camera.
Explains how to view recording status, stream type, frame rate, and bit rate for cameras.
Describes how to view alarm input details like number, name, type, status, and triggered camera.
Details how to view alarm output number, name, and status.
Covers viewing IPv4/IPv6 addresses, MAC address, DNS, DHCP, and PPPoE settings.
Explains how to view HDD status, capacity, free space, and recorded time.
Guides on viewing and exporting system logs containing events, alarms, and notifications.
Provides specific instructions for using Internet Explorer with the recorder's web interface.
Details how to access the recorder's interface using a web browser, including default network settings.
Explains how to configure HTTPS for secure, encrypted communication.
Describes how to view live video and manage recorder functions through the browser interface.
Guides on using the web browser interface to control PTZ camera movements and functions.
Explains how to search and play back recorded video using the browser interface.
Details how to search and view logs of events, alarms, and notifications.
Explains how to configure recorder settings locally and remotely through the browser.
To Next Page
