Need help?Do you have a question about the Interlogix TruVision 10 and is the answer not in the manual?
General| Series | TruVision |
|---|---|
| Product Type | Network Video Recorder |
| HDD Bays | 1 |
| Max HDD Capacity | 6 TB |
| Video Compression | H.264 |
| Power Supply | 12 VDC |
| Weight | 1 kg |
Details the environmental factors for NVR installation, including ventilation, temperature, and moisture.
Lists default user names and passwords for initial access to the NVR.
Factors to consider when choosing an installation location for the TVN 10 unit.
List of items included with the TruVision NVR 10 product package.
Describes the various connectors and ports located on the back panel of the NVR.
Instructions for powering the NVR unit on, off, and rebooting the system.
Guide to configuring basic NVR settings using the initial setup wizard.
Overview of different interfaces and methods available for controlling the NVR.
Details on operating the NVR using its physical front panel buttons and indicators.
How to use a USB mouse to navigate and configure the NVR interface.
Steps to define general recording parameters for IP cameras connected to the NVR.
How to set up specific times and conditions for NVR video recording.
Explains various methods the NVR uses to notify users of detected alarms.
Configuration guide for triggering alarms and recording based on detected motion.
Configuration of basic IP, subnet mask, and default gateway settings.
Instructions for setting up Dynamic DNS for remote access to the NVR.
Process to prepare the NVR's internal hard disk drives for use.
How to organize multiple HDDs into logical groups for recording management.
Procedures for connecting and managing IP cameras with the NVR.
Customizing on-screen display information such as camera name and date.
Overview of the NVR's normal operating mode for viewing live camera feeds.
Accessing live view functions using the mouse menu and front panel.
How to quickly access predefined PTZ camera positions and movements.
Explanation of the interface used for reviewing recorded video.
Methods to find video recordings by time, event, bookmarks, or snapshots.
Procedures for saving recorded video to external backup devices.
Steps to install the latest firmware for the NVR via USB or FTP.
How to reset NVR parameters to factory default settings.
Details on default Administrator, Operator, and Guest accounts and their privileges.
Guide for system administrators to create new user accounts with specific privileges.
Steps for configuring Internet Explorer for full NVR web interface functionality.
How to connect to and log in to the NVR using its IP address and default credentials.
Using the web interface to find and review recorded footage.
To Next Page
