Interlogix TruVision 10 - RTSP Service Port Setup; Telnet Setup

Chapter 7: Network settings
TruVision NVR 10 User Manual 53
To change the default ports:
1. From the menu toolbar, click Network Settings > More Settings.
2. Enter the new Server Port and HTTP Port values.
3. Click Apply to save the settings.
4. Click Back to return to live view, or continue configuring the NVR settings.
RTSP service port setup
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for
use in entertainment and communications systems to control streaming media servers.
To configure RTSP service port:
1. From the menu toolbar, click Network Settings > More Settings.
2. Enter the RSTP port value. The default value is 554.
3. Click Apply to save the settings.
4. Click Back to return to live view, or continue configuring the NVR settings.
Telnet setup
For Technical Support only.